99

IMPORTANT:

In certain reception conditions, station names may not be stored correctly, and Auto Guide Program Number Set may not work properly. When the Guide Programme numbers are not set properly, the programme that you do not intended to record will be timer-recorded by the VIDEO Plus+ system of the unit. When programming the timer

using the VIDEO Plus+ system, be sure to check the desired channel is selected correctly. ( pg. 56, “VIDEO Plus+® Timer Programming”)

Your unit memorises all receivable stations even if reception of some of them is poor. You can delete those

stations with an unacceptable picture from the list. ( pg. 100, “Delete A Channel”)

NOTES:

Fine tuning is performed automatically during Auto Channel

Set. If you want to perform tuning manually, refer to “Fine- Tuning Channels Already Stored” ( pg. 101).

If you perform Auto Channel Set when the aerial cable is not connected properly, “SCAN COMPLETED –NO SIGNAL–” appears on the TV screen in step C. In such a case, make sure of the aerial connection and press ENTER; Auto Channel Set will start again.

Manual Channel Set

Store channels that were not stored during Auto Set Up

( pg. 21), Preset Download ( pg. 23) or Auto Channel Set ( pg. 98).

A Access the Main Menu screen.

Press SET UP.

B Access the Confirmation screen.

APress w e to select “INITIAL SET UP”, then press

ENTER.

BPress w e to select “MANUAL CH SET”, then press

ENTER.

The Confirmation screen appears.

C Select the channel position.

Press rt w e to select a (Example) To store in position 6.

blank position in which you want to store a channel, then press ENTER twice. The Manual Channel Set screen appears.

The programme currently received on the selected channel position appears behind the confirmation screen.

Page 99
Image 99
JVC DR-M1SLB, LPT0827-001B Manual Channel Set, Select the channel position, Press w e to select Manual CH SET, then press