JVC DR-M1SLB, LPT0827-001B manual Perform Preset Download, Press Enter

23

Preset Download

Auto Channel Set by Downloading from TV/Auto Clock Set/Auto Guide Program Number Set

ATTENTION:

You can use this function only with a TV offering T-V Link, etc.* Be sure to use a fully-wired 21-pin SCART cable.

*Compatible with TVs offering T-V Link, EasyLink, Megalogic, SMARTLINK, Q-Link or DATA LOGIC via a fully-wired 21-pin SCART cable. The degree of compatibility and available functions may differ by system.

NOTES:

●For details, refer to the instruction manual of your TV.

●In the area where no TV station transmits a PDC (Programme Delivery Control) signal, the unit can perform neither Auto Clock Set nor Auto Guide Program Number Set.

●If there is a power cut, or if you press 1 or SET UP while downloading or set up is in progress, it will be interrupted; be sure to turn off the unit power once and try again from the beginning.

●Auto Clock Set may not function properly depending on the reception condition.

●On this unit, the characters available for station names (ID) are

A–Z, 0–9, –, f, + and I (space). Some names of downloaded stations may differ from those of your TV. ( pg. 101, “Set Stations (B)”)

If you have connected the unit to your TV via a 21-pin SCART cable ( pg. 18), the unit will automatically perform Preset Download instead of the Auto Set Up in step B on page 21. After downloading, the unit sets the clock and Guide Program numbers automatically.

●Slide the TV/CABLE/SAT/DVD switch to DVD.

A Turn on the unit.

On the unit

Press 1 on the unit.

On the remote control

Press DVD 1 on the remote control.

●The AUTO SET/T-V LINK display appears on the TV screen.

B Perform Preset Download.

APress ENTER.

●The AUTO SET/T-V LINK display appears on the TV screen.

BPress rt to move the

arrow to “T-V LINK” and press ENTER.

Preset positions on the front display panel increase from “PR 1”; do NOT press any button on the unit or remote control until the front display panel shows clock time, “PR 1” or “– –:– –” as illustrated on page 24.

●The T-V LINK screen will

appear. When Preset Download is completed, “COMPLETED” appears for about 5 seconds, then the normal screen appears.

●If you press any button on the

unit or remote control while downloading is in progress, it will be interrupted.

After “Preset Download” is completed, perform “Monitor Set” on page 25.