Display SET, Superimpose, Grey Back, Dimmer

DISPLAY SET

(The boldface settings in the table below indicate the settings at your purchase.)

8 SUPERIMPOSE	You can select the modes of indications superimposed on the TV screen.
OFF	OFF:
AUTO	To turn off superimposed indications.
ON	AUTO:
	To superimpose operational indications for approximately five
	seconds just after the corresponding operation.
	ON:
	To superimpose operational indications all the time.

	NOTES:
	● When you use this unit as the source player for editing, be sure to set “SUPERIMPOSE”
	to “OFF” before starting. ( pg. 83, “Edit To Or From Another Recorder”)
	● When you select “AUTO”, during playback, the operation mode indicators may be
	disturbed depending on the type of disc being used.

8 GREY BACK	When this function is set to “ON”, the TV screen becomes all grey when
OFF	receiving a channel not in use.
ON	NOTE:
	NOTE:
	When you want to receive an unstable channel with poor signals, set this function to
	“OFF”.

8 DIMMER	You can change the brightness of the front display panel.
BRIGHT	BRIGHT:
DARK	Normally select this.
	DARK:
	To dim the front display panel. (Blue lamp on the front display panel
	is turned off.)

8 POWER SAVE	When this function is set to “ON”, you can reduce the power consumption
OFF	while the unit is turned off.
ON	NOTES:
	NOTES:
	● During Power Save mode —
	— the front display panel will be turned off.
	— the Just Clock function ( pg. 104) does not work.
	● Power Save does not work when —
	— the unit is in the Timer mode.
	— the unit’s power is turned off after timer-recording or Instant Timer Recording.
	— the Automatic Satellite Programme Recording mode is engaged. ( pg. 65)
	— “L-2 SELECT” is set to “DECODER”, “SAT VIDEO” or “SAT S-VIDEO”. ( pg. 85)
	● It takes some time for the unit to complete initialisation after you turn on unit power,
	with “WAKE UP” blinking on the front display panel.