[Printer Select] Tab

This tab is used for selecting a printer and specifying the network
settings.
.
mCurrent Printer
mSelecting a printer
Selecting a printer from the pull-down menu switches the display to
the current status of the selected printer.
mSearching a printer
Clicking the [Scan Printer] button displays the search results in the
pull-down menu.
mSearching USB connection printers
A Click [Scan Printer].
B Printer search is performed, and the result is displayed in the
pull-down menu.
mSearching printers for the IPv4 address
A Select [IPv4], and click [Scan Printer].
B Printer search is performed, and the result is displayed in the
pull-down menu.
mSearching printers for the IPv6 address
A Select [IPv6], and click [Scan Printer].
B Printer search is performed, and the result is displayed in the
pull-down menu.
Cautions:
vThe printer connected via Ethernet (LAN) may not be searchable if
IPSec is enabled. In this case, search the printer again after
registering the printer.
mRegistering a printer
You can enter the IP address in the pull-down menu to register the
printer for the IP address in the menu.
Memo:
vRegistered IP addresses will be stored in the memory even after
exiting the status monitor.
vThe printer cannot be registered if the IP address format is
incorrect.
mRegistering printers for the IPv4 address
A Select [IPv4], and enter the IPv4 address in the pull-down
menu.
B Click [Scan Printer] to display the registration confirmation
dialog box.
C Click [OK] to register the printer for the entered IP address to
the pull-down menu.
mRegistering printers for the IPv6 address
A Select [IPv6], and enter the IPv6 address in the pull-down
menu.
B Click [Scan Printer] to display the registration confirmation
dialog box.
C Click [OK] to register the printer for the entered IP address to
the pull-down menu.
mDeleting a printer
You can select a printer and delete it from the pull-down menu.
mDeleting printers for the IPv4 address
A Select [IPv4], followed by selecting the printer to delete from
the pull-down menu.
B Select [Delete Printer] from the pull-down menu. A deletion
confirmation dialog box appears.
C Click [OK] to delete the selected printer from the pull-down
menu.
mDeleting printers for the IPv6 address
A Select [IPv6], followed by selecting the printer to delete from
the pull-down menu.
B Select [Delete Printer] from the pull-down menu. A deletion
confirmation dialog box appears.
C Click [OK] to delete the selected printer from the pull-down
menu.
mPrinter Name
For setting the name of the selected printer.
You can input up to 10 ASCII characters. Symbol characters may not
be displayed on the operation panel.
mDefault Interface
For setting the interface during startup. For Ethernet (LAN) connection,
the settings are displayed in the read-only mode, and they cannot be
changed.
Cautions:
vRegardless of the default interface setting, priority is given to USB if
a USB cable is connected.
vTo assign priority to the USB connection, enable the operation of the
computer and USB hub.
mNetwork
Enables you to print via the Ethernet (LAN) connection.
mUSB
Enables you to print via the USB connection.
mIPv4 Network Setting
For setting items related to Ethernet (LAN). For Ethernet (LAN)
connection, the settings are displayed in the read-only mode, and they
cannot be changed.
Cautions:
vDetermine the network setting items according to the instructions of
the network administrator for the location where the printer unit is
installed.
vOther network devices may be affected if the network setting is
incorrect.
vWhen only USB connection is used, there is no need to specify the
network setting.
Setup
114