Display Mode Setting
vThis is used for setting the information to be displayed on the
operation panel.
Settings
vCounter:
Displays the counter preset in "Counter setting".
vLaminator State:
Displays the operating status of the connected laminator. If a
laminator is not connected, the counter is displayed.
1Press I
vA [Cleaning] message appears.
.
2Press J to set to [Setting]
vPressing it each time displays the next setting item.
.
3Press G
vA [Display] message appears.
.
4Press G
vA [Mode] message appears.
.
5Press F
vEnters the settings change mode.
.
6Press A and select a setting
7Press B to confirm the setting
vPressing B confirms the setting and returns you to the previous
screen.
8Press H to exit the setting mode
v
Pressing it each time displays the setting item on the next higher level.
Counter Setting
vThis is used for setting the type of counter displayed on the
operation panel.
Counter Types
vTotal Cnt: total counter
Displays the total number of cards that are correctly printed.
vHead Cnt: head counter
Displays the total number of printed sides for the same head.
vFree Cnt: free counter
Displays the number of cards that are correctly printed. This number
can be reset.
vCleaning Cnt: cleaning counter
Displays the number of cards that are correctly printed after the last
cleaning.
vError Cnt: error counter
Displays the number of cards that are not correctly printed. This
number can be reset.
1Press I
vA [Cleaning] message appears.
.
2Press J to set to [Setting]
vPressing it each time displays the next setting item.
.
3Press G
vA [Display] message appears.
.
4Press G
vA [Mode] message appears.
.
5Press J to set to [Counter]
.
Operating the Printer
25