9After the cleaning card is discharged, turn off the power, and install
the card hopper
.
.
vTo turn on the power again, do so after an interval of at least 10
seconds.
Bobbin Holders
vIf burrs produced by friction with the bobbins are attached to the
bobbin holders, they may fall onto the card, ink ribbon, or retransfer
film, causing printing errors.
Cautions:
vIf the security lock is on, deactivate it. After work is complete,
activate the security lock again.
vStart work after ensuring that the power has been turned off.
vStand the cassette on a flat surface as illustrated in the diagram.
Avoid doing so on the floor as dust attached to it may cause printing
errors.
.
vDo not perform any work on the printer door. Do not place heavy
objects or apply load on the printer. Doing so may damage it.
vPerform cleaning each time you replace the ink ribbon or retransfer
film.
vAfter cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts
may result in malfunction of the printer.
vFor details on separately sold items, please consult our authorized
dealers.
1Open the printer door
.
2Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right)
.
3Press and hold down the cassette button, and remove the retransfer
film cassette (on the left)
.
Maintenance
40