4Apply alcohol to a cotton swab (large), and use it to wipe the four
bobbin holders
(Cotton swab and alcohol: sold separately)
.
5Insert the retransfer film cassette along the guide rail until a “click”
sound is heard
.
.
6Insert the ink ribbon cassette along the guide rail until a “click”
sound is heard, followed by closing the printer door
.
.
Thermal Head
vLines may appear on the card after printing if the thermal head is
dirty.
vClean the thermal head after printing about 10,000 images.
Cautions:
vIf the security lock is on, deactivate it. After work is complete,
activate the security lock again.
vStart work after ensuring that the power has been turned off.
vStand the cassette on a flat surface as illustrated in the diagram.
Avoid doing so on the floor as dust attached to it may cause printing
errors.
.
vDo not perform any work on the printer door. Do not place heavy
objects or apply load on the printer. Doing so may damage it.
vTouching the thermal head with your body electrostatically charged
may cause damage to the head. Make sure that you touch the
metallic part of the printer before commencing work.
vPay attention to prevent metallic objects from knocking against the
thermal head. Doing so may damage it.
vAfter cleaning is complete, check to ensure that all dismantled parts
are restored to their original positions. Failure to restore the parts
may result in malfunction of the printer.
vFor details on separately sold items, please consult our authorized
dealers.
1Open the printer door
.
2Press and hold down the cassette button, and remove the ink ribbon
cassette (on the right)
.
Maintenance
41