Basic operations of disc/file playback (continued)
Stopping playback |
| Pausing playback |
■When a disc/file is played back
Press 7.Resuming playback
When playback is stopped in the middle, playback can be started from the stopped position.
Temporarily stopping playback
■When a disc/file is played back
Follow any of the operations below.Press 7 once to stop playback.*1 *2
Select a source other than “DVD” or “USB” in the display window.*2
Press [AUDIOF] to turn off the main unit.*3
*1 “RESUME” is displayed in the display window. If 7 is pressed twice, the position where playback has been stopped is cleared.
*2 After this operation, the position where playback has been stopped is stored even when the main unit is turned off by pressing [AUDIO F].
*3 When you press [AUDIO F] to turn on the main unit again, the position where playback has been stopped is cleared.
Starting playback from the stored position
■When a disc/file is stopped in the middle
Press [DVD 3] or [USB 3].NOTE
•This function does not work in program playback or random playback.
•The stored position is cleared if the disc tray is opened or the USB device is disconnected.
•You can deactivate the resume playback func- tion. (Refer to “RESUME” on page 42.)
•When a file on the USB device is selected as the source, this function may not work as explained above.
■When a disc/file is played back
Press 8.
•To return to normal playback, press [DVD 3], [USB 3] or 3 (playback).
Advancing the picture frame by frame
(only for moving images)
■When a disc/file is paused
Press 8 repeatedly.•To return to normal playback, press [DVD 3], [USB 3] or 3 (playback).
27