Ripping sound directly from a CD to a USB device (continued)
| 7 Enter a title. | |
Adding (Editing) a title to a | ||
• Refer to “Entering a title” on page 56. | ||
track/group on a USB device | ||
• To cancel editing a title, press 7. | ||
|
1
2
3
4
5
6
Connect the USB device.
• Refer to page 21.
Press [USB 3].
Press 7 to stop playback.TV screen
Press 5, /, 2 or 3 (cursor) repeatedly to select the desired track/group.Press [TITLE/DELETE] repeatedly to select “T. TITLE” or “G. TITLE” in the display window.
Display window
•Select “T. TITLE” to add a title to a track.
•Select “G. TITLE” to add a title to a group.
Press [ENTER].
•The title of the selected track/group appears in the display window.
•If the track/group does not have a title, “NO NAME” appears instead.
•Press [CANCEL] to erase a stored title.
TV screen
NOTE
•When “WAIT” is displayed in the display window, you cannot start editing.
•If “NO USB” appears in the display window, check the USB device or its connection.
•You can also refer to messages on the TV screen when you add or edit a title to a track/ group on the connected USB device. The mes- sages indicate the operational status and pro- vide instructions.
•Do not press [AUDIO F] while the main unit is editing a title. If [AUDIO F] is pressed, the main unit automatically turns off after the title is edited.
•If you press [ENTER] without first entering a title, “EDIT ERR” appears in the display window and the following display appears on the TV screen. At this time, press [ENTER] again to enter a title.
TV screen
CAUTION
•Do not bump or move the main unit while editing a title. Such movement may interfere with edit- ing.
•Do not disconnect the USB device during edit- ing, as this may cause malfunction.
55