NOTE
•“480”, “576”, “720” and “1080” refer to the num- ber of the scanning lines. Generally, the larger the number, the better picture that can be obtained.
•“I” refers to the interlaced format. “P” refers to the progressive format. A better picture can be obtained in the progressive format than in the interlaced format.
•When an HDMI video signal is output, the “HDMI” indicator lights up in the display window.
•When an HD video signal is output, the “HD” indicator lights up.
•When “PAL. 576P”, “PAL. 720P”, “PAL.1080P”, “NT. 480P”, “NT. 720P” or “NT.1080P” is selected, the “PROGRESSIVE” indicator lights up in the display window.
5 Press [ENTER].NOTE
•It is recommended that you slide the remote control mode selector to [AUDIO] after selecting the video signal type. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•To check the compatibility of your TV, contact your local JVC customer service center.
•Even if the main unit is turned off, the video sig- nal type setting is stored.
Preparation
12