Playing back sources from external devices

Playing back sources from external devices

Remote control mode selector

■IMPORTANT

• Slide the remote control mode selector to [AUDIO].

Playing back sources from external devices

1 Press [AUDIO IN] or [DIGITAL IN].

•Pressing [AUDIO IN] displays “AUDIO IN” and selects the device connected to the [AUDIO IN] terminals.

•Pressing [DIGITAL IN] displays “DGTL IN” and selects the device connected to the [DIGITAL IN] terminal.

•You can also select the connected device as the source by repeatedly pressing [SOURCE] on the main unit.

2 Start playback on the connected device.3 Adjust the volume or the sound quality for your preference.

• Refer to page 13.

NOTE

•Refer also to the operation manual for the con- nected device.

•You can also operate your digital broadcast sat- ellite and video cassette recorder using the remote control of this system. Refer to pages 58- 60.

Selecting the signal gain

You can select the gain of the signal from the [AUDIO IN] terminals. Use the initial settings for normal operation. If the sound is too small or too loud, change the settings.

1 Press [AUDIO IN].

• “AUDIO IN” appears in the display window.

2 Hold down [ENTER].

•“LEVEL 1” or “LEVEL 2” appears in the dis- play window.

3 Press [ENTER] repeatedly to select “LEVEL 1” or “LEVEL 2”.

•Each time you press [ENTER], the display toggles between “LEVEL 1” and “LEVEL 2”.

•The signal gain in “LEVEL 1” is lower than that in “LEVEL 2”.

•The display returns to “AUDIO IN” in approx- imately 5 seconds.

19