For the locations of the remote control buttons, refer to page 52.

Entering a title

The operation is explained with the time when to enter “F” as an example.

1 Press 5 or / (cursor) repeatedly to select the character type set- ting.

•Each time you press 5 or / (cursor), the selected character type setting changes to “ABCDE”, “abcde” or “01234” on the TV screen.

•“ABCDE” refers to uppercase characters or symbols.

•“abcde” refers to lowercase characters or symbols.

•“01234” refers to numerical characters.

2 Press the number button [3] repeatedly until “F” appears.

•Several characters are assigned to one but- ton. Press the button repeatedly until the desired character is displayed. In this exam- ple, “D”, “E” and “F” are assigned to [3].

•For the available characters, refer to “Avail- able characters” shown on the right.

NOTE

•When you want to move the character entry position, press 2 or 3 (cursor) repeatedly.

•When you want to enter “NO”, “TV”, or other two or more characters which are assigned to one button (in this case, [6] or [8]), enter the first character, press 3 (cursor) to move the charac- ter entry position to the right, and then enter the second character.

•You can enter up to 24 characters for the file title and up to 28 characters for the folder title.

•When you want to erase a character, move the character entry position to the desired character, and press [CANCEL].

•When you want to enter a space, select the space from the symbol (Refer to “Available char- acters” shown on the right). You can also enter a space at the end of a title by pressing 3 (cur- sor).

•When you want to cancel title entry, press 7. The entered characters are not stored.

•If you enter a title that already exists, “THIS

NAME ALREADY EXISTS. PLEASE USE A DIFFERENT NAME.” appears on the TV screen. Enter a different title.

Available characters

You can use the characters shown below by repeatedly pressing the number buttons ([1] to [9] and [0]). Each number button is assigned with several characters.

*Available symbols

You can use the symbols show below by repeatedly pressing [1].

Space

Ripping sound directly from a CD to a USB device

56