Operating external devices using the remote control (continued)
Using the remote control for the DBS operation
Before the DBS operation, select the remote control mode for the DBS.
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
Operating a VCR using the remote control
Setting the manufacturer code
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
1
2 Operate the remote control by pointing it at the DBS.Remote control button Usage | |
[DBS/VCR F] | Turns on/off the DBS. |
[CH | Changes channels. |
Number buttons
NOTE
•When the remote control mode selector is slid to the lowest position and [DBS] is pressed, some buttons may not work.
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•Hold down [DBS/VCR F] until you finish step 5.
3 Press [ENTER] and release.
4 Press number buttons to enter the manufacturer code.
Examples:
For a Hitachi VCR: Press [0], then [4].
For a Mitsubishi VCR: Press [1], then [3].
When the manufacturer of your VCR has 2 or more codes, select the manufacturer codes in turn and find the one that operates the VCR and the remote control properly.
Manufacturer | Code |
JVC | 01, 02, 03 |
Emerson | 11, 26 |
Fisher | 29 |
Funai | 10, 14, 15, 16 |
Gold Star | 12 |
Hitachi | 04 |
Mitsubishi | 13 |
NEC | 25 |
Panasonic | 07, 17 |
Philips | 09 |
RCA | 05, 06 |
Samsung | 24 |
Sanyo | 21, 22, 23 |
Sharp | 27, 28 |
Shintom | 30 |
Sony | 18, 19, 20 |
Zenith | 08 |
The initial code setting is “01 (JVC)”.
59