Preparation (continued) Do not connect the power cable until all other connections have been made.

Preparation

Selecting the video signal type

To view an image on the TV screen, select the video signal type correctly according to the TV after connecting the main unit to the TV.

Remote control mode selector

2/3(cursor)/

ENTER

■IMPORTANT

• Slide the remote control mode selector to [SHIFT].

1 Turn on the main unit.

•Refer to “Turning on/off the main unit” on page 13.

2 Press [DVD 3] or [USB 3].

•When a disc is loaded or a USB device is connected, press 7to stop playback.

3 Press [SCAN MODE].

• The current video signal type appears.

Example: When “PAL. 576I” is selected as the video signal

4 Press 2or 3(cursor) to select the video signal type suitable for the TV.

•When the TV is connected to the [VIDEO] terminal or the [COMPONENT] terminals, the video signal type can be selected as instructed below.

-Select “PAL. 576I” for a TV only compatible with a PAL interlaced video signal.

-Select “PAL. 576P” for a TV equipped with a component terminal and compatible with a PAL progressive video signal.

-Select “NT. 480I” for a TV only compatible with an NTSC interlaced video signal.

-Select “NT. 480P” for a TV equipped with a component terminal and compatible with an NTSC progressive video signal.

•When the TV is connected to the [HDMI MON- ITOR OUT] terminal, the video signal type can be selected as instructed below.

-Select “AUTO” for normal usage. (the ini- tial setting)

-Select “PAL. 576P”, “PAL. 720P”, “PAL.1080I”, “PAL.1080P”, “NT. 480P”, “NT. 720P”, “NT.1080I” or “NT.1080P” as needed. (The selectable settings differ according to the resolution of the con- nected TV.)

•You can also select the video signal type by repeatedly pressing [SCAN MODE].

11