Press [ENTER].
• To adjust other items, go back to step 3.
Press [VFP].

Convenient functions of disc/file playback (continued)

Convenient functions of disc/file playback

Adjusting the picture quality (VFP)

When a disc/file is played back or paused

IMPORTANT

• Slide the remote control mode selector to [SHIFT].

1 Press [VFP].

The current settings are displayed.

Example: TV screen for the VFP mode Selected VFP mode

2 Press 2or 3(cursor) to select the video fine processor (VFP) mode.

Each time you press 2or 3(cursor), VFP mode changes on the TV screen as follows.

-“NORMAL”

For normal playback. (You cannot adjust the image quality.) Go to step 7.

-“CINEMA”

Suitable for viewing a movie in a dim room. (You cannot adjust the image quality.)

Go to step 7.

-“USER1/USER2”

You can adjust the image quality. Go to step 3.

3 Press 5or /(cursor) to select the item you want to adjust.

Each time you press 5or /(cursor), the item changes on the TV screen as follows.

-“GAMMA”

Controls the brightness of neutral tints while maintaining the brightness of dark and light portions.

(Setting range: –3 to +3)

-“BRIGHTNESS”

Controls the brightness of the display. (Setting range: –8 to +8)

-“CONTRAST”

Controls the contrast of the display. (Setting range: –7 to +7)

-“SATURATION”

Controls the saturation of the display. (Setting range: –7 to +7)

-“TINT”

Controls the tint of the display. (Setting range: –7 to +7)

-“SHARPNESS”

Controls the sharpness of the display. (Setting range: –8 to +8)

4 Press [ENTER].

Example: TV screen for “GAMMA”

5 Press 5or /(cursor) to change the value.

6

7

NOTE

It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].

If no operation is made for several seconds dur- ing the procedure, the settings made so far are automatically stored.

When the [HDMI MONITOR OUT] terminal is connected, this function does not affect the pic- ture quality.

35