You can operate your TV, digital broadcast satellite (DBS) and video cassette recorder (VCR) using the remote control of this system.
Number buttons*/
TV RETURN/ 100+
Remote control mode selector
3(playback)
*For the number button usage, refer to “Using the number buttons” on page 13.
Operating a TV using the remote control
Setting the manufacturer code
■IMPORTANT
• Slide the remote control mode selector to the lowest position.
1 Press [TV].2 Hold down [TV F].• Hold down [TV F] until you finish step 5.
3 Press [ENTER] and release.4 Press number buttons to enter the manufacturer code.Examples:
For a Hitachi TV: Press [1], then [0].
For a Toshiba TV: Press [0], then [8].
When the manufacturer of your TV has 2 or more codes, select the manufacturer codes in turn and find the one that operates the TV and the remote control properly.
Manufacturer | Code |
JVC | 01 |
Hitachi | 10 |
Magnavox | 02 |
Mitsubishi | 03 |
Panasonic | 04, 11 |
Philips | 15 |
RCA | 05 |
Samsung | 12, 18, 19, 20, 21 |
Sanyo | 13, 14 |
Sharp | 06, 16, 17 |
Sony | 07 |
Toshiba | 08 |
Zenith | 09 |
The initial code setting is “01 (JVC)”.
NOTE
•It is recommended that you slide the remote control mode selector to [AUDIO] after using this function. Most of the other functions can be used when the remote control mode selector is at [AUDIO].
•Manufacturer codes are subject to change with- out notice. You may not be able to operate the TV produced by the manufacturer.
•After replacing the batteries of the remote con- trol, set the manufacturer code again.
57