For the locations of the remote control buttons, refer to page 45.
Adjusting the echo effect
■When the “” indicator lights up in the dis- play window
1 Press [SETTING (KARAOKE)] repeatedly to select “ECHO LVL” in the display window.
Display window
2 Press [MIC VOLUME +] or [MIC VOLUME
Display window
This indicator lights up when the function is activated.
•You can select one from “ECHO: 1” to
“ECHO: 6” and “ECHO: OFF”.
•Selecting “ECHO: OFF” deactivates the echo function. (Refer to “Canceling the echo effect” shown below.)
•The echo level increases in order of “ECHO: 1” to “ECHO: 6”.
•When no operation is made for approximately 5 seconds, the setting mode is canceled and [MIC VOLUME +] and [MIC VOLUME
Canceling the echo effect
In step 2 above, press [MIC VOLUME +] or [MIC VOLUME
•The “ECHO” indicator disappears in the display window and the echo function is deactivated.
Adjusting the sound key to match your voice range
You can adjust the sound key to match your voice range during song playback. The sound key changes in increments of semitones.
NOTE
•When a source is selected, you can use this function unless the loaded disc is a DVD AUDIO or DVD VR.
•You cannot use this function for some sounds with a sampling frequency of 32 kHz or less.
■When the “” indicator lights up in the dis- play window and the song is played back
1 Press [SETTING (KARAOKE)] repeatedly to select “KEY CON” in the display window.
Display window
2 Press [MIC VOLUME +] or [MIC VOLUME
•You can select one from “KEY:
“KEY: +6”.
•The sound key increases in order of “KEY:
•Selecting “KEY: 0” returns to the normal sound key.
•When no operation is made for approximately 5 seconds, the setting mode is canceled and [MIC VOLUME +] and [MIC VOLUME
NOTE
•When “DVD” or “USB” is selected as the source, and you stop playback, the setting returns to “KEY: 0” (the initial setting).
•When you change the source, the setting returns to “KEY: 0” (the initial setting).
Enjoying karaoke
48