JVC RX-DV3RSL Creating Realistic Sound Fields, Activating Surround Mode, Selecting Surround Modes

Creating Realistic Sound Fields

Activating Surround Mode

When Auto Surround is set to “OFF” or 2-channel source other than Dolby Surround software is played back, activate Surround mode manually.

Make sure that you have set the speakers information correctly (see page 24 or 55).

•If only front speakers are connected, you cannot activate any Surround mode.

On the front panel:

Press SURROUND ON/OFF.	ON/OFF MODE
	SURROUND
The SURROUND indicator lights up on the display
(when Auto Surround is set to “OFF”).	REC MODE

•Each time you press the button, Surround mode is activated or deactivated alternately.

Selecting Surround Modes

When 2-channel source is played back with Surround mode activated, you can select another Surround mode.

Available Surround modes will vary depending on the number of the connected speakers and the playback sound.

Make sure that you have set the speaker information correctly (see page 24 or 55).

•If rear speakers are not connected, you cannot use DAP modes and the All Channel Stereo.

On the front panel:

SURROUND

Press SURROUND MODE.	ON/OFF MODE
• Each time you press the button, Surround mode
is changed as illustrated below:	REC MODE
From the remote control:

From the remote control:

1 Press SOUND.

SOUND

SOUND

1 Press SOUND.

Number buttons now work for sound adjustments.

Number buttons now work for sound adjustments.

2 Press SURR ON/OFF.	SURR ON/OFF
	7

The SURROUND indicator lights up on the display (when Auto Surround is set to “OFF”).

•Each time you press the button, Surround mode is activated or deactivated alternately.

2 Press SURR MODE.	SURR MODE
• Each time you press the button, Surround mode is	10/0
changed as illustrated below:

When 5 or 4 (except center speaker) speakers are connected:

DIGITAL AUTO		PRO LOGIC
SURROUND
L	R	VOLUME

About SURROUND indicators

•When Auto Surround is set to “ON,” the AUTO SURROUND indicator always lights up on the display.

•When you activate Surround mode manually with Auto Surround set to “OFF,” the SURROUND indicator lights up on the display.

DIGITAL AUTO PRO LOGIC AUTO SURROUND

L R SUBWFR

DIGITAL AUTO PRO LOGIC SURROUND

L R SUBWFR

SUBWFR

PL		MOVIE	PL		MUSIC
	II			II
LIVE CLUB			DANCE CLUB
HALL			PAVILION
ALL CH ST.			(back to the beginning)

When 3 (except rear speakers) speakers are connected or Dolby Digital including matrix source is played back:

DIGITAL AUTO		PRO LOGIC
SURROUND
L	R	VOLUME

SUBWFR

PL		MOVIE	PL		MUSIC
	II			II

Signal and speaker indicators on the display

The following signal indicators light up —:

L, R : • When digital input is selected: Light up when the signals corresponding to each channel come in.

•When analog input is selected: Always light up.

C, LS, RS : Light up when the signals corresponding to each channel come in.

S: Lights up when the monaural rear channel signal

or Dolby Surround encoded signal comes in.

LFE : Lights up when the LFE channel signal comes in.

Signal indicators Speaker indicators

The speaker indicators light up as follows:

•The subwoofer speaker indicator ( ) lights up when “SUBWFR” is set to “YES” (see page 24) or “USE” (see

page 55).

•The other speaker indicators light up only when the corresponding speaker is activated, and also when required for the current playback.

31