
Turning Off the Sounds Temporarily
MUTING
From the remote control ONLY
Press MUTING to mute the sound.
“MUTING” appears on the display and the volume turns off (the VOLUME indication goes off).
•When DVD is selected as the source with your TV turned on, “VOLUME
DIGITAL AUTO
L | R | SPK. |
To restore the sound
Press MUTING again.
•Pressing VOLUME + or – on the remote control (or turn MASTER VOLUME on the front panel) also restores the sound.
Turning Off the Power with the Sleep Timer
SLEEP
From the remote control ONLY
Press SLEEP repeatedly.
The SLEEP indicator lights up on the display.
•Each time you press the button, the
|
| SLEEP indicator |
|
|
|
DIGITAL AUTO |
|
|
L R | SPK. | SLEEP |
| VOLUME | |
|
| |
|
|
|
10
20
30
60
0 (off) 150
120
90
When the
Changing the Display Brightness
DIMMER
From the remote control ONLY
Press DIMMER to dim the display.
•Each time you press the button, the display and illumination lamp dim and brighten alternately.
Activating TV Direct
TV DIRECT | TV DIRECT STB | VCR | DVD |
|
On the front panel | From the remote control |
You can use this unit as a DVD player and an AV selector while the unit is not turned on. When this function is activated, the pictures and sounds go from the video components to the TV through this unit. In this case, you can use the video components and the TV as if they were connected
•This function takes effect only when the video components and TV are connected to this unit with SCART cables.
•This function takes effect for the following
•This unit can be automatically turned on or off, and/or select the source automatically when you set the Auto Function mode to “AUTO1” or “AUTO2.” For details, see “Auto mode” on page 26.
To activate (or deactivate) TV Direct, follow the procedure below:
1Press TV DIRECT.
All the indications disappear (except when DVD is selected as the source), then the source indicator currently selected lights up.
2Turn on the video component and TV.
3Press one of the source selecting
STB, or VCR.
The indicator corresponding to the
The unit is turned off automatically.
selected source lights up.
DVDSTBVCR
To check or change the remaining time until the
Press SLEEP once.
The remaining time (in minutes) until the
•To change the
To cancel the Sleep Timer
Press SLEEP repeatedly until “SLEEP 0” appears on the display. (The SLEEP indicator goes off.)
•Turning off the unit also cancels the Sleep Timer.
Note:
•If Sleep Timer and Auto Standby (see page 56) are used at a time, one with the early
Ex. : When DVD is selected.
To cancel TV Direct and turn off the unit, press
STANDBY/ON (or
STANDBY/ON AUDIO on the remote control).
The unit is turned off and the STANDBY lamp lights up.
To cancel TV Direct and turn on the unit, press TV DIRECT.
Notes:
•When TV Direct is activated, you cannot enjoy any of the sound effects this unit produces, and cannot use the speakers connected to this unit.
•You can use
12