MAIN MENU
RECORD
ALARM CLOCK / TIMER COMMUNICATION DISK
SYSTEM
GOTO DISK PAGE
DISK SETTING
REFORMAT
HD2 USAGE
ALARM SELECT
MAIN PAGE
BACKUP ALARM TO HD2
4.5.2 Secure Digital Card (SD Card) Backup
The SD card slot of the rear unit has three functions as shown below:
1. Archive Single image Clips into SD Card |
|
| |
Please take the following steps to archive a critical image in a SD card. |
|
| |
(1) | Insert a SD Card into the SD card slot of the rear unit. |
|
|
(2) | Start playing back the recorded video. (When playing back recorded video made by a | ||
| multiplexer, you must get into the multiplexing mode and display picture by picture in | ||
| order to select the desired image for archiving. Press the Monitor button | to get into | |
| the multiplexing mode under this mode so that the light of the Monitor button | is off | |
SELECT: Duplicate a particular recorded video from HD1 to HD2.
zStay on the DISK SETTING page.
zUse the “^” and “v” buttons, 
and 
, to highlight BACKUP, select SELECT and
then press the Enter button 
to list all the recorded video.
zPress the “^” and “v” buttons, 
and 
, to select the desired clip and press the
Search button 
to mark it.
zAfter completing the selection, press the Enter button 
to proceed.
| and the pictures are switching swiftly) | |
(3) | Press the PAUSE button | to freeze the desired pictures. |
(4) | Press the Enter button | to save the image in the SD Card. |
| The quantity of pictures that can be stored depends on the SD card capacity. It depends | |
| on SD card capacity how many pictures can be stored. You can have the saved images | |
| printed out in any computer. The image is stored in the JPEG compressed format. If | |
| more than one clip is stored in a SD card, file names will be assigned in sequence as | |
| shown below. |
|
| SAVE TO J0000.JPG | |
MAIN MENU
RECORD
ALARM
CLOCK / TIMER
COMMUNICATION
DISK
SYSTEM
GO TO DISK PAGE
HD1 |
|
| |
A 1 | 12:20 |
| |
2 |
|
| + |
03:30 | |||
A 3 | 04:20 | + | |
4 | 13:30 |
| |
DISK SETTING
REFORMAT
HD2 USAGE
ALARM
SELECT
MAIN PAGE
BACKUP PART TO HD2
TOTAL: 41 M
READY TO GO
OK CANCEL
SAVE TO J0001.JPG
…
SAVE TO J000N.JPG
2.Backup the System setting info into SD Card.
The
Save the whole setting into the SD card:
zInsert a SD card into the SD card slot.
zPress the Setup button 
to enter the setup mode and select the SYSTEM.
zHighlight SYSTEM and press the Enter button 
to enter the SYSTEM SETTING page.
zSet SD SETUP to SAVE. Then the system setting info will auto save into SD card.
NOTE: If the capacity of HD 2 is not sufficient to store all selected video, a warning message “HD2 SPACE NOT ENOUGH” will be displayed on the screen. Please, insert a larger capacity of
NOTE: The black back will remain (1/7 of screen from the bottom) after executing HD BACKUP. In such a case, it will disappear by opening the Search menu or starting playing back movies. This is not a defect.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
Table 4.5.2 A. Compatible SD Cards
Manufacturer | Capacity |
Panasonic | 32MB ~ 128MB |
PQI | 32MB ~ 128MB |
Hagiwara | 32MB ~ 128MB |
NOTE: SD Cards not shown on this list have not been tested by the engineering team and are not recommended for use with this product. For the latest updated list on the recommended SD Cards, please contact your dealers or distributors.
* About the location of the buttons, please refer to Page 10 2.1 Front View.
36 | 37 |
