JVC VR601 instruction manual Disk Setting System, Main Menu Record Disk Setting, HD 1

05/15/03 18:19:32 ON

05/15/03 18:19:32 OFF 05/15/03 18:19:32 REC 05/15/03 18:19:32 STOP 05/15/03 18:19:32 PLAY 05/15/03 18:19:32 V-IN 05/15/03 18:19:32 V-LOSS 05/15/03 18:19:32 P-LOSS

Clears out all the data stored in HD 1 and HD 2.

Clears out all the data stored in HD 2, which is set to backup purpose only. (This function has to be proceeded with when the HD 2 USAGE option is set to BACKUP.)

5.5 DISK SETTING

5.6 SYSTEM

MAIN MENU

RECORD

DISK SETTING

REFORMAT : HD 1 2

This page is used for accessing the history of the operation status, setting the password, resuming factory default, and determining the menu display background.

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

GOTO DISK PAGE

REFORMAT:

HD 2 USAGE	: REC
BACKUP	: FULL

MAIN PAGE

DISK REFORMAT/CLEAR

MAIN MENU

RECORD

ALARM CLOCK / TIMER COMMUNICATION DISK

SYSTEM

SYSTEM
OPERATION LOG	: ENTER
MENU BACKGND	: 2
BUZZER	: ON
PASSWORD	: SET
SETUP PWD	: OFF
DEFAULT	: LOAD
SD SETUP	: SAVE
VERSION	: ENTER

This option allows you to clear out all the data in the hard-disk drive. You will be required to enter the pre-set password before proceeding with clearing out the data. Enter the standard password “9999” if you don’t set your individual password. To set your individual password, please refer to section 5.6 PASSWORD option.

HD 1 2:

GOTO SYSTEM SETTING

OPERATION LOG:

MAIN PAGE

VIEW OPERATION LOG

BACKUP HD:

HD2 USAGE:

This option determines the way to utilize the hard-disk drive in the mobile compartment.

BACKUP: Used for data backup only, which will not be part of regular recording hard-disk drive.

REC: Used for the regular recording hard-disk drive.

NOTE: When you wish to play back a recorded video from a HD2, this option must be set to REC. For more details, please refer to section 4.3.4.

BACKUP:

This function allows you to duplicate data from HD 1 to HD 2. Please set HD 2 as BACKUP first. (For operation details, please refer to section 4.5.1)

FULL: Duplicates all the recorded video from HD1 to HD2.

ALARM: Duplicates all the alarm-event recorded video from HD 1 to HD2

SELECT: Duplicates a particular recorded video from HD1 to HD2.

This log shows the history of the operation status in chronological order. What the following entries represent is detailed below.

ON: Powers up the device.

OFF: Powers off the device.

REC: Starts recording.

STOP: Ceases recording.

PLAY: Shows recorded video.

V-IN:Video input is connected.

V-LOSS:Video loss occurs.

P-LOSS:Power interruption occurs.

A-IN:Detects an alarm input.

LOCK: Disables the entire front panel controls.

UNLOCK: Releases the key lock.

UPDATE: Updates system software.

Note: The log keeps an operation history on a revolving basis because of a limit is 2000. When the log is full, the newly registered record of an operation will replace the existing records from the oldest one.

48 49