Please read the followings before getting started:

PRECAUTIONS
Recording Operation
Alarm Recording (P.27)
ªThe alarm recording is interrupted if the Video-Loss occurs during Alarm recording.
Backup Operations
Mobile Rack HD Backup (P.35)
ªPlease operate backup ( FULL / ALARM / SELECT ) exclude the 2.00MB files. Otherwise backup
operation may not perform correctly.
BACKUP Operations
SD Card Backup (P.37)
ªThe maximum number of the saving images into one SD Card is 500. Please operate SD Card
Backup within the object file's name (F0xxx.jpg) do not exceed 500.
Menu Setup
Changing IP address (P.46)
ªPlease operate off and on after changing the IP address.
RS-232, RS-485 or NetViewer
Operate in the Key Lock mode (P.53, P.66)
ªThe Playback picture reaches at the END of recorded data in HDD with key lock mode, it will
continuously play back in short period near Data end and it will not stop. In such a case, please
send the "STOP" command.
RS-232 & RS-485
"TIME SEARCH" command (P.54)
ªWhen sending the "TIME SEARCH" command, please make sure to send the "STOP" command
just before sending it.
NetViewer
Inputting "URL Of Remote Device" (P.63)
ªDo not add extra “0” when inputting "URL Of Remote Device".
(Ex. OK: 192.168.1.10, NG: 192.168.001.010)
NetViewer
Save a viewing image (P.66)
ªWhen performing successional saving images, the saving interval changes with the PC
performance and the network environment.
Network Viewer
Change the Record Properties (P.67)
ªWhen the Alarm Operation is ON, The image software (Network Viewer) doesn't show the pictures
and a message will be displayed.
ªPlease do not set up Alarm setting via the Network Viewer. If set up Alarm setting via the
Network Viewer, please set up Pre-Alarm setting from MAIN MENU again. Because the
displayed setup may differ from an actual setup.
Handling of the HDD
ªPlease do not extract the removable HDD or do not move this equipment for 15 seconds after
OPERATE OFF. It may cause a failure of the HDD.