22
1. Before cleaning, switch off and
unplug from the power outlet and
remove the removable power
cord from the Pressure Express.
Ensure the unit is fully cooled prior
to commencing cleaning.
2. Wash the removable cooking bowl
with warm soapy water and a clean
soft cloth or sponge. Rinse with
clean water and dry thoroughly.
3. The stainless steel housing and
safety locking lid can be wiped
over with a soft, damp cloth and
then dried thoroughly.
4. Remove the condensation
collector by gently pulling the
collector away from the Pressure
Express housing body and clean
it thoroughly in warm water. Dry
thoroughly and place it back in
its original position.
5. Remove and disassemble lid.
a. First, gently pull the silicone
rubber gasket straight up and
out from under the gasket
holder. Check periodically
that it is clean, flexible and not
cracked or torn. If damaged
do not use the appliance.
Wash the gasket and hold er
in warm, soapy water.
Rinse with clean water, dr y
thoroughly and plac e back
in their original position.
See the instructions on how
to remove the silicone rubber
valve on page 8.
Care, Cleaning and Storage
NOTE: Soak the silicone
rubber gasket in a mixture of
bicarbonate of soda and water
to help eliminate odours from
spices, before cleaning.
NOTE: After cooking rice or large
meals some cooking liquid may
pool under the lid at the top of
appliance around the cooking
bowl. This is normal. Use a paper
towel or kitchen cloth to clean
after every use. Use a small brush
or cotton swab if necessary.
NOTE: Replace the silicone
rubber gasket every 1–2 years
(see your nearest Kambrook
Service Centre)
IMPORTANT: The silicone
rubber gasket must
always be properly
positioned. If t he gasket is
not assembled pro perly,
the Pressure Expres s will
not operate correctly.
b. Wash the inside of the safety
locking lid with a wet, soapy
sponge or cloth. Use a soft
brush to remove oil residue
if necessary. Wipe dry with a
clean, damp cloth.