Kathrein MSK 33, 9986492 manual Displays, Operating Elements and Connections, Front panel

Displays, Operating Elements and Connections

Front panel

All operating elements, the display screen and the RF input are located on the front panel of the MSK 33.

1

2

1TFT display screen

3Numerical entry field

5Vol- and Vol+: Volume adjustment

Ch- and Ch+: Channel switching

For some unit functions, the four functions function as cursors.

7Menu mode

Unit settings such as videotext, spectrum analysis, constellation analysis, auto-measure, scope and MVG 10 tracking can be made here.

9OSD/Help button

On/Off switch of the on screen display

11 BNC RF input socket

	6
3	7
	8
4	9
	10
5	11
	12

2Softkeys

The functions of the individual softkeys are in- dicated on the right-hand side of the screen.

4Selection buttons Confirmation of units and entries

6On/Off switch (Standby)

Quickly press this button to switch the unit on or off. When you switch off the MSK 33 by pressing this button, the last unit setting is saved. When the unit is switched on again, the unit remains in the last used type of operation. Hold the button down for ca. 4 seconds to fi- nally switch off the unit (processor-reset).

8Menu copy

Here are all the unit settings for the printer memory and data output.

10LED-DC

The red LED lights up, as soon as the re- mote power voltage is switched on or DC

voltage is present on the antenna cable.

12LED mains

The green LED lights up, as soon as the MSK 33 is connected to the mains and the mains switch on the rear panel of the unit is switched on.

16