Kathrein 9986492, MSK 33 Scope Menu, Video scope menu, Horizontal zoom Reducing the video signal

Scope Menu

BACK

video

audio

DiSEqC

Video scope menu

BACK

zoom + x zoom - x signal /noise rflev +0dB sample 1

Horizontal zoom – Reducing the video signal

The last set menu is called up.

video	With this button, you
	can switch on the video
	scope.
audio	Switches on the audio
	scope menu.
DiSEqC	Switches on the DiS-
	EqC scope.

The last set menu is called up.

Horizontal zoom –Enlarging the video signal

By pressing this button, the video signal can be zoomed

on the screen. Eight zoom stages are available. Each time the button is pressed, the zoom switches to the next stage. If the field no longer lights up yellow, the highest zoom stage is reached.

By pressing this button, the video signal can be reduced on the screen. Eight zoom stages are available. Each time the button is pressed, the zoom switches to the next lower stage. If the field no longer lights up yellow, the lowest zoom stage is reached.

S/N measurement

The S/N measurement is carried out, in order to measure the signal-to-noise spac- ing of TV and Sat signals. The S/N measurement is carried out weighted with CCIR filters. The measurement of the noise level is carried out in an empty line; the line must be manually set. With the „zoom x“ button, the video signal is set in such a way, that no synchronised impulse or picture content are shown on the TFT screen. By pressing the softkey, the S/M measurement begins. The measured S/N value appears afterwards on the screen.

65