Sat Operation
Initial ANALOG-menu
With this softkey, the Sat menu is called up.
|
|
|
|
|
| Calling up the sound subcarrier |
|
|
|
|
|
| menu |
|
|
|
|
| SUBCAR | |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| level |
|
|
|
|
|
| beep |
|
|
|
| ||||
|
|
|
| |||
| mea- |
| ||||
| min/max 55.5/56.0dbµV |
| ||||
|
| sure | In the function, level | |||
|
|
|
|
| ||
| 70 |
|
| MORE | beep,“ an acoustical | |
| ><11208.00MHz A56.0dBµV |
|
| signal is produced, | ||
|
|
| whose pitch is | |||
|
|
|
|
|
| |
proportional to the
received signal level. With it, it is possible to optimally align the receiving antenna to a transmitter.
In this menu, the receiving frequency can be changed using the cursor buttons, ◄►.
Level measurement ANALOGUE
Calling up the level measurement ANALOGUE as well as minimal and maxi- mal level measurement.
You can now measure the level of the analogue satellite signals. As long as this measurement function is called up, the MSK 33 measures the minimal and maxi- mal level. This measurement function serves for monitoring the check points for level fluctuations. Even after exiting the menu, the MSK 33 stays set on ANA- LOGUE reception.
The following display appears on the screen, when the button „measure“ is pressed: Display of the minimal level 78.0 dbµV and maximal level 82.5 dBµV.
Display Sat frequency, analogue reception „A“ and level.
Both arrows in front of the transponder frequency display simpli- fies the precise tuning to the middle frequency.
An „A“ in front of the level display means, that the MSK 33 is set to analogue reception. Even after the menu is closed, the MSK 33 remains set to ANA- LOGUE reception.
For level measurement for digital satellite signals, the MSK can be switched over to the digital menu, refer to the respective section.
Calls up the second submenu ANALOGUE.
37
