Kathrein 9986492 Submenu for entering DiSEqC commands, TX display field, Display field a, Entry

Sat Operation

Submenu for entering DiSEqC commands

This submenu is called up by pressing the button „tx input“ in the DiSEqC menu.

Entry

The hex number, where the cursor is posi- tioned, is displayed and flashes. This hex number can be edited with the numerical button field (1-9), with one of the softkey buttons (A to F) or with the buttons ▲ and ▼. The switch to the next character occurs with the cursor buttons, ◄►. The four code words - Framing (FRAME), Address (ADD), Command (COM) and Data (DATA) – are located in abbreviated form above the appropriate hex codes. Press the ENTER button to exit the menu.

Refer to the technical appendix of this operating manual for an overview of the DiSEqC commands.

TX display field

In the TX display, the DiSEqC commands can be edited, which are transmitted from the MSK 33 to another DiSEqC unit. The buttons, ◄ and ►, are used here as cursor buttons. With the buttons, ▲▼, the hex code can be gradually increased or decreased.

Display field A

In this display field, the DiSEqC command, which is given in the

TX display field, is displayed:

Display field B

In this display field, a brief explanation of the selected DiSEqC command is displayed.

If a DiSEqC command is entered-in , which is not listed in the

MSK 33, this display will appear.

31