On Screen Display (OSD)
Press to quit the help function and return to the main menu. Press
again to return to the original programme you were receiving.
TV Channel Identifier
The channel identifier is displayed for a few seconds each time you
change the programme or constantly if you press the button. The i indicates that a channel is being received even if no picture can be seen (e.g. radio). The TV symbol indicates a TV channel - adjacent to it is the selected programme, whether Videotext/Teletext is being received, and the current time. The + on the third line indicates the programme selection from the master list. If the Favourites list is selected, the “apple” symbol appears here. This is followed by the programme title, the start and end time of the current programme, and the next programme, if this data is being transmitted.
Radio Channel Identifier
The message for the set radio channel has the same layout. A radio receiver symbol in the top
Error Signalling
“Weak signal or no signal” indicates that an error has occurred in the reception system or in the receiver settings, or that the transponder is not sending. The channel identifier shows a satellite antenna instead
of the i. Check the Sat IF connection and the LNB configuration. The list of service settings at the end of this manual can be used to help you do this.
19
