Kathrein UFD 580S manual One-Touch Recording OTR

Hard Disk Recorder

One-Touch Recording (OTR)

You can record an encrypted programme even if no CAM or Smartcard is inserted!

Note:

Note:

With your twin-DVR Sat receiver you can immediately record the current programme to the hard disk at the press of a button. All you

need to do is press the red  button. During recording, the red standby LED on the front panel of the receiver flashes, and “R” (or 2 x “R” if two recordings are being made) flashes in the top left-hand corner of the screen for a few seconds.

If you want to start recording within the first five minutes of the

programme you will need to press the red  button again and check that the end (stop) time is correct. If required, you can enter the stop

time in half-hour increments using the  buttons or directly using the number pad. Press  to save the change.

Recording is automatically stopped after switching EPG or after two hours at the latest.

You can still select all other programmes.

If you press the  button, you will see the recording status and can stop the recording process (see below).

Using the screenshot above, you can also check the recording status without having to interrupt the recording. The stop time is indicated at

the right of the top bar. Press  to return to the full screen without stopping recording.

Press  to view the hard disk contents.

If you press the  button at this stage of recording, a second - time- shifted - recording is started! You can stop that recording by pressing

and  or by pressing .

You can stop recording by pressing  and . You can then delete the programmed recording by pressing  and .

45