Software and Programme List Update

After the “Display Info” request an on-screen display appears which you should use as a guide.

Pay attention to all on-screen displays!

Following a software update you must reset Winter/Summer time as appropriate!

You can also download the updates from the Internet, at:

http://www.kathrein.de/ esc-kathrein/englisch/ download/ufd/ firmware_ufd580.cfm

You can move the light-coloured cursor bar using the  and or

buttons to select the item you want to deactivate (No). Items that are already inactive cannot be changed. If you only want to update the software but leave your channel list alone, deselect the “Channel List” field, or vice versa. You can also request “Info Text” only.

To update, move the cursor bar to “Start” and confirm with . The receiver then begins the update and displays the following message where applicable:

Once the update is complete, the receiver is re-initialised and starts operation again. In case of an error or no signal, the message “Download failed” appears.

Never turn off the receiver during the update process, as otherwise you could lose the entire software. If this happened, the receiver would have to be re-installed at the factory or using a PC and zero- modem cable. During the download “Please wait” flashes on-screen.

85

Page 85
Image 85
Kathrein UFD 580S manual Software and Programme List Update