Adding/Removing Satellites
You can now make the entries in the relevant items according to your
reception system using the buttons. Press three times to exit the menu. The new transponder data is saved.
Entering a Satellite Name
You can change the satellite name in the “LNB Configuration” menu using the number pad buttons. For information on how to do this, refer to the “Operating Instructions” section.
Removing Satellites
To remove a satellite, open the main menu by pressing , select “Installation” with , select “LNB Configuration” with and use the buttons to move the cursor bar onto the satellite you want to
remove. After pressing , you are asked if you want to remove the satellite, and can confirm or decline the prompt.
Pay attention to the bar at the bottom of the
71
