Kathrein UFD 580S manual Programming a Recording

TVTV EPG and Timer

Programming a Recording

If no EPG data is available for the channel you selected:

In the “Current” view select the channel for which you want to programme a recording and

press the red  button. As

there is no EPG data, you must enter the data (date, start, end) manually. Use the arrow buttons () and number buttons to make your input.

Press  to save your settings.

You can use the  buttons to switch to the details on the next

programme in the selected view. Press  to return to the previous display, such as the programme list.

You can programme a recording from the various views of the EPG (“Current”, “Program list”, “Highlights” and “Det.information” [Details]) and from within their various submenus.

Programming is pre-configured for two SAT IF input signals. If you are operating the receiver in Loop mode (“LNB 1 Loop out” output on “LNB 2 in” input), this may cause problems when two programmes are recorded at once (if both programmes are not transmitted on the same transponder).

Use the arrow buttons () to select the programme you want and press the red  button. The following display appears (example):

35