Setting System Parameters

The summer time should be corrected as necessary in order for the timers to turn on and off at correct times.

You can correct the time yourself in 30 minute increments using the  buttons. To do this, move the cursor bar to the “Local time” item

using the button. Press twice to end your input. The receiver saves the new setting.

When you subsequently switch the receiver off, do so from the remote control - not at the mains switch, otherwise the settings will be lost.

TV Type

Here, you can use the  buttons to specify whether your TV set is a

PAL,

multi-standard or

NTSC

set.

Press twice to confirm.

Aspect Ratio

Here, you can use the  buttons to select the type of picture format for which your TV set is designed. Either

4:3 format or

16:9 format or

Auto

Press twice to confirm.

Screen

Here, you can use the  buttons to select the type of screen display.

Conventional (P/S) = standard representation for 4:3 sets or

Letterbox display – This setting enforces the widescreen format for a 16:9 set.

Press twice to confirm.

A/V Mode

Here, you can use the  buttons to select the type of video signal at the Scart socket. Select the signal that your TV set can process.

Refer to the operating instructions for your television set!

Composite colour – composite baseband signal

RGB – Red/Green/Blue signal or

Y/C – S-VHS signal (luminance/chrominance)

Press twice to confirm your selection.

69

Page 69
Image 69
Kathrein UFD 580S manual TV Type, Aspect Ratio, Screen, Mode