5Continue the measurement.

7 If a confirmation message (fi) is displayed: Use [MULTI CONTROL 3] to select "Continue".

[ENTER]

7 If an error message (›) is displayed: Use [MULTI CONTROL 3] to select "Retry".

[ENTER]

The measurement starts again.6Auto Setup completes.The display changes from "Analyzing" to "Complete" when Auto Setup completes.

When "Confirm" is displayed, pressing the [ENTER] key makes it possible to confirm the measurement data. (See <To confirm the measurement data> ‹.)

Use [MULTI CONTROL 2/3] to select "Return".

[ENTER]

•Certain listening room properties may cause errors in the results of measurements of the speaker levels and distances. In this case,

set up the unit again using "Manual Setup". (See <Speaker setup –"Manual Setup"–> fl.)

•If the speakers or speaker placement have changed after auto setup, perform the auto setup again.

To confirm the measurement data1Select "Confirm" and press [ENTER] in step 3.

2Use [MULTI CONTROL 2/3] to select the item to be confirmed and press [ENTER]. And then use [MULTI CONTROL 2/3] to confirm its data.

The following setting data can be confirmed.–Speaker configuration ("SP Setup")–Speaker levels ("SP Level")–Speaker distances ("SP Distance")–Crossover frequency ("Crossover")For details on the setting items, see <Speaker setup –"Manual Setup"–> fl.To cancel measurement in the middle

Any of the following operations will stop the measurement in the middle and returns the display to the normal input display.

•Power ON/OFF•Pressing the [AUTO ROOM EQ] key•Press the [SETUP] key•Pressing the [INPUT SELECTOR] key

Setup

English 33