Playback

VOLUME CONTROLINPUT SELECTOR AV AUX/iPod VOLUME /o

Input source keys

1Select the source.Use the Input source keys on the remote control unit to select a source.Or use [INPUT SELECTOR] knob or [AV AUX/iPod] key on the main unit.2Start playback from the selected source.The iPod can be controlled from this unit. (See <iPod control> i.)3Use [VOLUME %/fi] to adjust the volume.4Enjoy various surround effects.

You can enjoy a variety of listen modes. (See <Surround play using the listen mode> Q.)

The surround effects can be fine tuned according to theselected input source. (See <Adjustments according to the playing source> „.)

•The AV AUX and iPod inputs cannot be selected with the [INPUT SELECTOR] knob of this unit. These inputs should be selected using the [AV AUX/iPod] on this unit or the [AV AUX] or [iPod] key on the remote control unit.

Monitoring the input source in the original sound (STRAIGHT DECODE mode)

The signal input from a source can be output directly without any sound field effect added to it.

STRAIGHT DECODE
STRAIGHT

 

DECODE

Playing

1 Select the source.

music

 

2 Start playback from the selected source.

or

3 Press [STRAIGHT DECODE].

movie

 

When STRAIGHT DECODE mode is enabled, the listen mode

 

is selected automatically according to the input signal. (See

 

<Input signals and corresponding listen modes> W.)

 

"STRAIGHT" indicator lights up.

 

To cancelPress [STRAIGHT DECODE].STRAIGHT DECODE mode is also canceled when [LISTEN MODE] is operated.

•When the input mode is "6ch Input", the listen mode does not change. (<Selecting the input mode> r)

•If the input signal uses a number of channels larger than the number of speakers in use, the signals are distributed automatically according to the available speakers.

English 45