Input signals and corresponding listen modes
Dolby Digital, Dolby Digital EX, Dolby Digital Plus and Dolby TrueHD sourceConnected audio input jack | HDMI, OPTICAL, COAXIAL |
|
|
|
|
| HDMI |
|
|
| ||
Input signal |
| Dolby Digital / |
|
| Dolby Digital Plus |
| Dolby TrueHD (96kHz and lower) | Dolby TrueHD | ||||
| Dolby Digital EX |
|
|
| (176.4kHz/ 192kHz) | |||||||
|
|
|
|
|
|
|
|
|
| |||
Listen mode | */2 | 2ch | Others | */2 | */4/3 | 2ch | Others | */2 | */4/3 | 2ch | Others |
|
Dolby Digital |
|
|
|
| * |
|
|
| * |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Dolby Digital Plus + Pro Logic IIx
Music*3Dolby Digital Plus + Dolby EX*3Dolby TrueHDDolby TrueHD + Pro Logic IIxMovie*1
Dolby TrueHD + Pro Logic IIx Music*3Dolby TrueHD + Dolby EX*3Pro Logic IIx Movie/Pro Logic II Movie*2Pro Logic IIx Music/Pro Logic II Music*2Pro Logic IIx Game/Pro Logic II Game*2Pro LogicStereo*1 Can be selected only when both the surround back left and right speakers are connected
*2 Pro Logic II is selected if no surround back speakers are connected.
*3 Can be selected when one or more surround back speakers are connected.
•Certain listen modes may not be selected depending on the input signal type and speaker setup.
•If the surround effect cannot be obtained or the desirable listen mode cannot be selected, check the following setups.
−Speaker setup
−Input mode setup
−Audio setup of the player component
•When a digital signal with a number of channels exceeding the current speaker setup is input, the input signal is downmixed automatically according to the current speaker setup.
"*/2" or "*/3", etc, in the table under <Input signals and corresponding listen modes> indicate the channels encoded in the input signal. When an encoded signal is input, the input channel indicators on the display panel light as follows.
*/2 : | , | , | , | , |
| or | , | , | , |
|
|
|
|
*/3 : | , | , | , | , | , |
| or | , | , | , | , |
|
|
*/4 : | , | , | , | , | , | , | or |
| , | , | , | , | , |
2ch : | , |
|
|
|
|
|
|
|
|
|
|
|
|
Others : Dual Mono (, ), 3/0 (, , ), 3/1 (, , , )
• For "LFE" and "S" input channel indicators, see <About indicators> p.
52