Preparation for playing music or movie
Playing music or movie
INPUT SELECTOR
LISTEN MODE | INPUT MODE |
SPEAKERS |
|
A/B/OFF |
|
| RECEIVER ON | LISTEN MODE |
Input source keys
Turning on the power
1Turn the connected monitor and player component ON.2 Press [RECEIVER ON] (remote control unit) or [ ] (main unit) to turn on the unit.
Setting the speaker system
¶Operation available only on the main unit of this unit.Selecting the input mode
¶Operation available only on the main unit of this unit.
When playing a component connected to the digital input terminal (CD(ASSIGNABLE), VIDEO2 or DVD) or the HDMI input terminal (DVD IN or VIDEO2 IN), set the input mode to match the type of the audio input.
1Use [INPUT SELECTOR] to select "CD" (or "VIDEO 1" or "AUX" which you assigned to CD(ASSIGNABLE) terminal), "VIDEO2" or "DVD" input source.
2Press [INPUT MODE] to select the input mode.Each press switches the mode as follows.When the HDMI input is disabled:Display | Setting | |
| The digital and analog inputs are switched automatically according | |
| "Full Auto" | to the input signal. When a digital input is detected, the decode | |
mode is also switched according to the signal type (PCM/Dolby | ||
| ||
| Digital/DTS). | |
| The input mode is fixed at digital to accelerate the input signal | |
"Digital Manual" | processing and eliminate lack of audio at the beginning of playback. | |
The decode mode is also fixed according to the type of the signal | ||
| to be played. | |
"6ch Input"*1*2 | The analog | |
| DVD player connected to the DVD/6CH IN terminal. | |
| "Analog"*2 | The input mode is fixed at analog. | |
| This is selected for playback of analog player components. |
*1 "6ch Input" setting can be selected only when the input selector is set to "DVD (6ch In)".
*2 This cannot be selected when in DTS play mode.When the HDMI input is enabled:(Input source is set to "DVD" or "VIDEO2" only)Display | Setting | |
"Signal Auto" | The decode mode is switched automatically according to the digital | |
| signal type (PCM/Dolby Digital/DTS). | ||
| ||
"Signal Manual" | The decode mode is fixed according to the type of the digital signal | |
to be played. | ||
|
The speaker system(s) to be used light up. | • The AUTO DETECT indicator lights when "Full Auto" or "Signal |
| Auto" is selected. |
| • Speaker system B cannot be selected when the input mode is | • If the audio is lost as a result of change in the input signal while |
| "6ch Input". | "Digital Manual" is selected, press [LISTEN MODE]. |
44