Confirming the HDMI function

Note that some HDMI control functions may not work with certain components and TV that are not compatible with them. To use the HDMI control functions properly, it is recommended to confirm the HDMI control functions usable with each connected component by performing the steps described below. If a function that is not available with a connected component is found, the related setup should be set to off before using this unit.

Before operation

•Check that this unit, the TV and the HDMI connection capable components are connected through HDMI cables.

•Check that the HDMI control of the TV and the HDMI- connectable components are enabled.

(For the setups of the TV and player components, refer to their instruction manuals.)

•Enable the HDMI control of this unitHDMI LINK: On, POWER CTRL: On, TV CTRL: On, TV AUDIOIN: On

Confirming the basic HDMI operations

1Turn all of the HDMI-connected components ON.

2Switch the TV input to an input source connected through HDMI connection to this unit.

3Set the input selector of this unit to select the HDMI-connected input source and confirm that its video is displayed and the audio is output from the speakers properly.

Confirming the HDMI control functions

1Turn all of the HDMI-connected components ON.

2Adjusts the volume with the remote control unit of the TV.Is the volume of this unit adjusted accordingly? (HDMI Control confirmation)3Turn the TV OFF (standby) with its remote control unit.Are all of the components turned OFF? (Power Control confirmation)

4With all of the HDMI-connected components OFF, start playing a player component.

Are all of the components turned ON and the inputs of this unit and the TV switched automatically? (HDMI Link and Power Control confirmations)

5If the TV has the audio output selector, switch the input selection and confirm that the appropriate audio is output.

Is the appropriate audio output from this unit or the TV according to the audio input selection of the TV? (TV Control confirmation)

•If the TV does not have the audio output selector, set "TV CTRL" in the HDMI setup of this unit to "Off" and select the audio output destination in "Audio Out".

•If noise interferes with TV, set "Audio Out" to this unit or set the audio output of the TV and recorder/player component to PCM by referring to their instruction manuals.

6Switch the TV input to the built-in tuner.

Is the input to this unit switched automatically to "OPT1"? (TV Audio In confirmation)

•The HDMI control functions are not available during the following operations.−During speaker setup using test tone−During auto setup (KRF-V9300D and KRF-V8300D)−While the recording mode is set to on−During auto memory of radio stations

Setup

English 43