Names and functions of parts
Main unit
Before use
|
|
|
| VOLUME CONTROL |
DOLBY | DTS | HIGH | STRAIGHT |
|
HDMI LINK READY DIGITAL | DEFINITION | DECODE |
| |
SPEAKERS A/B/OFF |
|
|
|
|
MULTI CONTROL |
|
|
| INPUT SELECTOR |
SETUP | DOLBY | BAND | INPUT MODE | AV AUX/iPod |
LISTEN MODE | VIRTUAL |
| PURE AUDIO MODE | |
ENTER | STRAIGHT | AUTO/MONO | ACTIVE EQ | VIDEO |
PHONES | DECODE |
|
|
|
D
(Power) key Standby indicatorPress to switch this unit ON or to put it to standby.
The standby indicator lights in the standby mode.
2Display3Indicators HDMI IndicatorLights blue when the HDMI link is on.
DOLBY DIGITAL indicatorLights up when the DOLBY DIGITAL signal is input.
DTS indicatorLights up when the DTS signal is input.
HIGH DEFINITION indicatorLights up when one of the following signals is input through HDMI. −Dolby Digital Plus
−Dolby True HD −DTS Master Audio
−DTS High Resolution Audio
STRAIGHT DECODE indicatorLights up when STRAIGHT DECODE mode is on.
4Remote sensor5VOLUME CONTROL knob6 PHONES jackDIMMER
| 7 SPEAKERS A/B/OFF key | r |
Press to select the speakers to be | |
used. |
|
| 8 LISTEN MODE knob | Q |
Turn to select the listen mode. |
|
Turn to select a setting item.
4/¢ knobTurn to skip an iPod track. | o |
Also used to recall a preset radio | |
station. | I |
Press to select a setting item. Also used to select a radio station.
Y
0 SETUP keyºPress to set up this unit.
!ENTER keyPress to enter the selected item.
@| DOLBY VIRTUAL key | T |
Press to switch the Dolby Virtual | |
Speaker function or Dolby |
|
Headphones function ON/OFF. |
|
| |
| DIMMER key | ˇ |
Press to switch the brightness of the display and indicators.
# STRAIGHT DECODE key tPress to switch the STRAIGHT DECODE mode ON/OFF.
| $ BAND key | Y |
Press to select the broadcasting band.
6 keyoPress to play/pause the music/video playback of iPod.
%AUTO/MONO keyPress to switch the radio tuning mode between auto tuning and manual
tuning.Y Also used to select the recording
mode.P
| ^ INPUT MODE key | r |
Press to select the input mode. |
|
| & ACTIVE EQ key | Π|
Press to switch the ACTIVE EQ |
|
function ON/OFF. |
|
Turn to select the input source.
( PURE AUDIO MODE key yPress to switch the PURE AUDIO
MODE ON/OFF.
)AV AUX/iPod keyPress to switch the input source between AV AUX and iPod.
¡AV AUX jacksConnect a video camera, videogame machine, etc.
Standby modeWhile the standby indicator is lit, a small amount of power is supplied to the system to back up the memory. This is called standby mode. Under the condition, the system can be turned ON by the remote control unit.
8