KRF-V9300D and KRF-V8300D Virtual mode

These modes allow you to enjoy surround sound even when you use headphones or you connect only the front speakers.

DOLBY VIRTUALDOLBY VIRTUAL 1Press [DOLBY VIRTUAL].Each press switches the setting as follows:Dolby Virtual Speaker mode (When not using headphones)

Display

Setting

"Dolby VS Wide"

Provides the virtual surround effect with a wider expansion and

spatial feeling.

 

"Dolby VS Ref"*

Provides the virtual surround effect. This is the standard setting.

"Dolby VS Off"

Sets the Dolby Virtual Speaker mode to off.

*This can be selected when the surround speaker setup is set to off.Dolby Headphone mode (When using headphones)

Display

Setting

"Dolby H On"

Sets the Dolby Headphone mode to on. Provides the virtual

surround effect.

 

"Dolby H Off"Sets the Dolby Headphone mode to off.

•In the virtual modes, certain listen modes cannot be selected depending on the reproduced signal.

•The virtual modes are set to off when the sampling frequency is either 176.4 kHz or 196 kHz.

DVD 6 channel analog input

Surround play is possible if you use a DVD player with 6- (5.1-) channel output.

INPUT MODE

INPUT SELECTOR

DVD

Surround

terminals of this unit.

effects

Preparations

 

• Connect your DVD player to the [DVD/6CH IN]

 

• Turn the components to be used ON.

 

1Set the input source to "DVD".

2Press [INPUT MODE] and select "DVD (6ch IN)" input mode.

3Play the DVD.

•It is not possible to adjust the speaker level or sound effect of the channels separately when this unit is in the 6ch Input mode. ([EASY SETUP] (KRF-V7300D), [SETUP], [SOUND], [LISTEN MODE], [ACTIVE EQ] and [TONE] will not be functional.) Adjust the speaker level with the controls of the DVD player. Refer to the Instruction manual of the DVD players for the detailed operating instructions.

•DVD 6-channel play is not available when "DVD A/V" is selected in

the HDMI input setup. (See <HDMI input setup – "HDMI Input" –> ‚.)

English 55