Kenwood KRF-V7300D, KRF-V8300D, KRF-V9300D Adjustments according to the playing source, Speaker level adjustment, Input level adjustment, "SR, "SB, "SL, "SBR, "SBL, ENTER, SOUND, Range, "CNTR, "SUBW

Adjustments according to the playing source

Sound adjustment

The audio can be adjusted as desired according to the source being played.

ENTER

SOUND MULTI CONTROL //O/1Press [SOUND] to enter the surround adjustment mode.2Use [MULTI CONTROL 2/3] to select the item to adjust.

Display	Setting item	Range
"CNTR"	Center speaker level	-10 – +10dB
"SR"	Surround Right speaker level	-10 – +10dB
"SBR"	Surround Back Right speaker level	-10 – +10dB
"SB"	Surround Back speaker level	-10 – +10dB	*1
"SBL"	Surround Back Left speaker level	-10 – +10dB
"SL"	Surround Left speaker level	-10 – +10dB
"SUBW"	Subwoofer level	-10 – +10dB
"INPUT"	Input level	-6, -3, 0	*2
"PANORAMA"	Panorama mode	"On", "Off"
"Dimension"	Dimension		*3
"Center Width"	Center Width
"Center Image"	Center Image		*4
"Midnight"	Midnight mode	"Auto", "1",	*5
		"2", "Off"
		"Main", "Sub"
"Dual Mono"	Dual mono audio selection	"Main+Sub",
		"Stereo"

*1 The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed.

*2 Analog source only

*3 Pro Logic II Music mode and Pro Logic IIx Music mode only *4 Neo:6 Music mode only

*5 For "Auto": Dolby TrueHD source only

Speaker level adjustment

The output level from the desired speaker channels can be fine adjusted according to the properties of each source.

The adjustment is only temporary for the current input selection. The value will return automatically to the original setup value when the power is turned on/off or when the input selection is changed.

1Use [MULTI CONTROL 2/3] to select the speaker to adjust ("CNTR", "SR", "SBR", "SB", "SBL", "SL" or "SUBW").

2Use [MULTI CONTROL ∞/5] to adjust the level.3Repeat steps 1 and 2 to adjust the level of other speakers.

Input level adjustment

¶Analog source only

If the input level of an analog source signal is too high, the CLIP indicator will light to indicate. Adjust the input level.

1Use [MULTI CONTROL 2/3] to select "INPUT".2[MULTI CONTROL ∞/5] to adjust the input level.

3Use [MULTI CONTROL ∞/5] to adjust the desired item.For detailed adjustment method, see the explanation of each item.To exit the sound adjustment modePress [SOUND].

62 KRF-V9300D/KRF-V8300D/KRF-V7300D