Input assignment –"Assignment"–
The input source for the signal output at the CD (ASSIGNABLE) terminal can be assigned: CD, VIDEO1 or AUX.
1Select "Assignment".[SETUP]
[MULTI CONTROL 2/3]
[ENTER]
2Select the input source to be assigned.Use [MULTI CONTROL ∞/5] to select the input.[ENTER]
Display | Setting |
| "OPT1 CD" | Assign CD as the input source |
"OPT1 VIDEO1" | Assign VIDEO1 as the input source |
| "OPT1 AUX" | Assign AUX as the input source |
Audio delay –"Audio Delay"–
If the monitored video is delayed in time with respect to the audio from the speakers, the audio output timing can be delayed.
1Select "Audio Delay".[SETUP]
[MULTI CONTROL 2/3]
[ENTER]
2Set the delay time.Use [MULTI CONTROL ∞/5] to select the delay time.[ENTER]
The delay time is adjusted from 0ms to 300ms in 10ms step.Setup
English 39