14

Kingston Switch Configuration Utility

Address Learning

Enable: This option is enabled by default, which will cause the MAC address of the source of a packet to be learned.

Disable: When disabled, the MAC address of the source of a packet from this port will not be learned.

Broadcast Storm Control

Enable: If the accumulated consecutive broadcast packets in the input buffer of a port is over the threshold specied by the value of the Broadcast Storm Control Threshold on the System Page, new incoming broadcast packets will be discarded until the number has been reduced below the threshold.

Disable: Disabled by default, this option ensures the broadcast packet will not be throttled.

Full Duplex Flow Control

Enable: Enabled by default, this option allows the 802.3x full duplex ow control mechanism.

Disable: When disabled, the 802.3x ow control mechanism is not used in full duplex mode.

Auto-Negotiation

Enable: Enabled by default, this option allows the port to determine the Data Rate and Duplex Mode of the attached device.

Disable: Disabling this option allows the user to specify the Data Rate and Duplex Mode settings manually.

Note: If using the port with the ber (FX) interface, this option is disabled.

Data Rate

The user may specify the data transmission rate for the selected port.

Note: If using the port with the ber (FX) interface, this option is xed at 100Mbps.

Duplex Mode

The user may specify full duplex or half duplex mode for this port.

Apply to Other Ports

When the Apply to Other Ports button is selected, a popup window will appear allowing you to select any other ports that you wish to have the same conguration as the currently selected port.

Kingston Technology Company

KNS3250/R User’s Guide - Rev. A00

Page 19
Image 19
Kingston Technology KNS2450/R manual Address Learning, Broadcast Storm Control, Full Duplex Flow Control, Auto-Negotiation