Vlan Group | Kingston Technology KNS2450/R, KNS3250/R, KNS1650/R

20	Kingston Switch Configuration Utility

Disable: This option is selected by default. Packets received with an unknown unicast destination address (DA) will be forwarded to all ports (except the receiving port) within the same VLAN groups that the received port (trunk) belongs to.

Flood control is available only when at least one VLAN group is assigned. And the out-link port must be assigned when ood control is enabled for proper operation.

When ood control is enabled, each VLAN group must choose a member as its out-link. If some VLAN groups have overlapped members, one of these members should be chosen as the out-link. If a port (or trunk) belongs to more than one VLAN group, packets that it receives with an unknown destination address (DA) will only be forwarded to one of the out-links of those VLAN groups that it belongs to.

VLAN Group

The list box shows all dened VLAN groups of the system, and each row is a group. Any individual port or trunk can be a member of a VLAN group, and each group comprises at least two members. One of the members is to be chosen as its out-link. If ood control is disabled, the Out-link column will not appear.

To remove the current highlighted group, press the Delete button. Press the Add button to add a new group. To modify settings, select the Modify button or double click the current highlighted group to modify its content. While adding or modifying a VLAN group, the dialog Modify the VLAN Group (or Add a New VLAN Group) as below will popup for user to specify its content.

Kingston Technology Company

KNS3250/R User’s Guide - Rev. A00

Image 25

Kingston Technology KNS2450/R, KNS3250/R, KNS1650/R manual Vlan Group

Contents

Models KNS1650/R KNS2450/R KNS3250/R KNS3250/R Users Guide Rev. A00 Wichtige Sicherheitshinweise Important Safety Instructions Table of Contents Kingston Technology Company Introduction Model Types Special Features Package Contents Switching Function Design FeaturesLink Trunking Auto-Negotiation Full-Duplex Store-and-Forward SwitchingFlow Control Power LED Hardware InstallationLink / Activity LED Full Duplex and Collision LED AC Power ConnectorFiber FX module port optional 10/100TX UTP Ports Switch Conguration Utility Software InstallationDevice Conguration Main Screen File Printer Port I/O Address Device Type Kingston Switch Configuration Utility System Device Conguration PropertiesSuperMAC Aging Control Broadcast Storm Control Threshold Aging TimeDescription Port Selection PortSecurity Address Learning Duplex ModeBroadcast Storm Control Full Duplex Flow Control Trunk Assignment Trunk Selection, Trunk Port Assignment Load Balancing MethodLoad Balancing Mapping MAC Address Based Last byte of source MAC address SA Load Balancing Mapping Port Based Flood Control Vlan Vlan Group Kingston Switch Configuration Utility Explicit Address Table Explicit Address Table Kingston Switch Configuration Utility Editing a Conguration File Using the Switch Conguration Utility Sending the Current Conguration to the Switch Kingston Technology Company Vlan #1 Engineering Assigning Trunks and Setting Vlan Groups Kingston Technology Company Kingston Switch Configuration Utility Kingston Technology Company Kingston Switch Configuration Utility Kingston Technology Company Data cannot be read from or written to the device Troubleshooting Kingston Technology Company Appendices UTP Port Pin Assignments Appendix a Pin Assignments Appendix B Cabling Guidelines UTP Cable WiringUTP Cable Type Table B-4 4-Pair T568A Wiring UTP Cable Wiring Standards Terms You Should Be Familiar With UTP Cable Rating Codes Appendix C Specications Environmental KNS150FX/SC Appendix D Fiber FX Modules & Installation Installing the ber module Rubber Feet for Desktops Appendix E Mounting TemplatesBrackets for Rack Mounting Duration of Warranty Limited Warranty StatementAppendix F Warranties and Notices Free Technical Support Warranty Claim RequirementsDisclaimers CE Notice C. CerticationTick Certication