Kodak DC3200 manual Camera Communications Problem Cause Solution

Camera Communications

Problem	Cause	Solution
The computer cannot	The camera is not set	Set the camera to PC
communicate with the	to PC Connect mode.	Connect mode. See
camera.		page 30.
	The camera is not	Connect the serial
	connected to a serial	cable to the camera
	cable, or the cable is	and computer port.
	not connected to a	See page 30.
	computer serial port.
	The port setting in the	Change the COM port
	software is set to an	setting to Auto-Search
	incorrect COM port.	or to a specific COM
		port.
	The communication	Set the speed setting to
	speed setting in the	9,600 bps. If
	software is not	communication is
	adjusted.	successful, gradually
		raise the speed to
		optimize
		communication time.
	There is a conflict	Refer to the serial
	with another serial	device and/or
	device, such as	operating system
	infrared	User’s Guide, or
	communication,	consult the computer
	internal fax modem, or	manufacturer.
	other communication
	system.
	The software that	Exit that software
	generates frequent	before starting the
	interrupts (such as a	KODAK Software.
	Web browser or
	e-mail software) is
	running.

38