2 Installation/First Scan

Contents

Setup

Install software

Setup

2-1

Install software

2-1

Connect scanner

2-2

Scanning

2-3

Power saver mode and turning the scanner off

2-5

This section provides detailed information supporting the Installation Guide/ First Scan that is provided with your scanner. Follow these steps in the order they are provided to install your scanner.

NOTES:

If you have already performed all of the steps in the Installation Guide/First Scan, skip this section.

When positioning the scanner, be sure to provide adequate clearance at the back of the scanner if you will be using the rear document exit or the Kodak Printer Accessory.

1.Insert the Kodak i3000 Scanner Installation CD in the CD-ROM drive. The installation program starts automatically.

2.Select Install Scanner Software.

A-61771 September 2012

2-1

Page 12
Image 12
Kodak I3400, I3200 manual Installation/First Scan, Contents Setup