Running a transport | The transport should be cleaned with a Transport Cleaning Sheet fed several | |
cleaning sheet | times. | |
| 1. | Remove the wrapping from the Transport Cleaning Sheet. |
| 2. | Adjust the side guides to the widest position. |
| 3. | Place the transport cleaning sheet in the center of the input tray in |
|
| landscape orientation with the adhesive side up. |
| 4. | Scan the transport cleaning sheet. |
| 5. | Remove the transport cleaning sheet from the output tray and place it in |
|
| the center of the input tray in landscape orientation with the adhesive side |
|
| down and rescan. |
| 6. | Steps 4 and 5 may need to be repeated a few times until all residue is |
|
| removed. |
| NOTE: When the transport sheet gets dirty and/or loses its tackiness, discard | |
|
| it and use a new one. |
Final cleaning steps | When finished running the transport cleaning sheet: | |
| 1. | Open the scanner cover. |
| 2. | Wipe the exposed side of the upper and lower imaging guides with a lint- |
|
| free cloth. |
| 3. | Close the scanner cover and scan a test image to ensure image quality. |
