Cleaning the rollers
Cleaning the separation roller tires
Cleaning the rollers includes all of the rollers in the transport area, the separation roller tires and the feed module tires.
1.Turn off the scanner and open the scanner cover.
2.Manually rotate and wipe the rollers with a roller cleaning pad.
3.Dry the rollers with a
4.Remove the
5.Remove the separation roller.
6.Manually rotate and wipe the separation roller tires with a roller cleaning pad. For best results wipe parallel to the ribs in order to remove any residue between the ribs.
7.Inspect the tires. If the tires show signs of wear or damage, replace the tires or the separation roller. See “Replacement procedures” later in this chapter.
8.Reinstall the separation roller by aligning the slots on the separation roller with the holders.
