Korg MICRO 17. DELAY

41
17. DELAY — SYNTH/VOCODER
TYPE [Stereo Delay,
Cross Delay, L/R Delay]
Selects the delay type.
Stereo Delay ( ):
This is a stereo delay. (➝Figure 17-1)
Cross Delay ( ):
This is a stereo delay where the left
and right channels of feedback are
interchanged. In a Layer program,
it is effective to set the pan of the
two timbres to left and right respec-
tively. (➝Figure 17-2)
L/R Delay ( ):
This is a delay where the delay
sound is output to left and right al-
ternately. (➝Figure 17-3)
TEMPO SYNC [OFF, ON]
Specifies whether the delay time
will be synchronized to the tempo.
OFF ( ):
Delay off (not synchronized). The
delay will operate according to the
"DELAY TIME" value you specify.
ON ( ):
Delay on (synchronized). The delay
will synchronize to the ARPEG.A
"TEMPO" setting or to MIDI Clock
data from an external device.
DELAY TIME [0...127]
Sets the delay time.
This parameter is available only if
"TEMPO SYNC" is OFF.
SYNC NOTE [1.32...1.1]
Specifies the ratio of the delay time
relative to the ARPEG.A "TEMPO"
value. (➝p.65)
This parameter is available only if
"TEMPO SYNC" is ON.
DELAY DEPTH [0...127]
Specifies the delay depth and feed-
back amount. Increasing this value
will make the delay louder and will
also increase the amount of feed-
back.
If you do not wish to apply a delay,
set this to 0.
Excessively high settings of this
parameter may cause the output
to be distorted.
Stereo Delay
DELAY
FEEDBACK
FEEDBACK
DELAY
Cross Delay
DELAY
FEEDBACK
FEEDBACK
DELAY
L/R Delay
DELAY
FEEDBACK
FEEDBACK
DELAY
Figure 17-1 Figure 17-2 Figure 17-3
The delay effect simulates the delays that occur when sound travels through air.
"TYPE" (knob 1) selects the type of delay effect. "DELAY DEPTH" (knob 4) sets the delay depth and the amount of feedback. "TEMPO SYNC"
(knob 2) specifies whether the delay time will be synchronized to the tempo set by the arpeggiator or by an external MIDI clock.