208
037: Detune

Using this effect, you can obtain a detune effect that offsets

the pitch of the effect sound slightly from the pitch of the

input signal. Compared to the chorus effect, a more natural

sound thickness will be created.

d: Input Level Dmod [%], d: Src

This parameter sets the dynamic modulation of the input level.

038: Pitch Shifter

This effect changes the pitch of the input signal. You can select

from three types: Fast (quick response), Medium, and Slow

(preserves tonal quality). You can also create an effect in

which the pitch is gradually raised (or dropped) using the

delay with feedback.

a: Mode

This parameter switches the pitch shifter operating mode. With

Slow, tonal quality will not be changed too much. With Fast, the

effect becomes a Pitch Shifter that has a quick response, but may

change the tone. Medium is in between these two. If you do not

need to set too much pitch shift amount, set this parameter to

Slow. If you wish to change the pitch significantly, use Fast.

b: Pitch Shift [1/2tone], b: Src, b: Amt, c: Fine [cent], c: Amt

The amount of pitch shift will use the value of the “Pitch Shift”

plus the “Fine” value. The amount of modulation will use the c:

Amt value plus d: “Amt.”

Modulation Source is used both for “Pitch Shift” and “Fine.”

e: Feedback Position, f: Feedback

When “Feedback Position” is set to Pre, the pitch shifter output is

again input to the pitch shifter. Therefore, if you specify a higher

value for the Feedback parameter, the pitch will be raised (or low-

ered) more and more each time feedback is repeated.

If “Feedback Position” is set to Post, the feedback signal will not

pass through the pitch shifter again. Even if you specify a higher

value for the Feedback parameter, the pitch-shifted sound will be

repeated at the same pitch.

a
Pitch Shift [cent]
Sets the pitch difference from the input signal –100...+100cent
Src
Selects the modulation source of the pitch shift Off...Tempo
Amt
Sets the modulation amount of the pitch shift –100...+100cent
bDelay Time [msec]
Sets the delay time 0...1000msec
c
Feedback
Sets the feedback amount –100...+100
High Damp [%]
Sets the damping amount in the high range 0...100%
d
Input Level Dmod [%]
Sets the modulation amount of the input level –100...+100
☞,
Src
Selects the modulation source for the input level Off...Tempo
☞
e
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Input Level
Input Level
+
High Damp
Delay
Feedback
Detune
Input Level
Louder
Max
Zero
Higher D-mod
Input Level
Max
Zero
Higher D-mod
x1.0
x0.5
Amt= +100
Amt= +50
Louder
x1.0
x0.5
Amt= –100
Amt= –50
Input Level D-mod
Left
Right
Wet / Dry
Wet / Dry
Wet: Mono In - Mono Out / Dry: Stereo In - Stereo Out
Input Level
Input Level
+
High Damp
Delay
Feedback
Pitch Shifter
Feedback Position
Pre Post
aMode Slow, Medium, Fast
Switches Pitch Shifter mode ☞
b
Pitch Shift [1/2tone] –24...+24
Sets the pitch shift amount by steps of a semitone ☞,
Src Off...Tempo
Selects the modulation source of pitch shift amount ☞
Amt
Sets the modulation amount of pitch shift amount –24...+24
☞
c
Fine [cent]
Sets the pitch shift amount by steps of a cent –100...+100cent
☞,
Amt
Sets the modulation amount of pitch shift amount –100...+100cent
☞
dDelay Time [msec]
Sets the delay time 0...1000msec
eFeedback Position
Switches the feedback connection. Pre, Post
☞
f
Feedback
Sets the feedback amount –100...+100
☞
High Damp [%]
Sets the damping amount in the high range 0...100%
g
Input Level Dmod [%] –100...+100
Sets the modulation amount of the input level ☞ Fx:037,
Src
Selects the modulation source for the input level Off...Tempo
☞ Fx:037
h
Wet/Dry Dry, 1:99...99:1, Wet
Sets the balance between the effect and dry sounds
Src Off...Tempo
Selects the modulation source of the effect balance
Amt
Sets the modulation amount of the effect balance –100...+100